Siren and Strobe Alarm (Indoor)

Siren and Strobe Alarm (Indoor)

43.99

Integrate it into your home automation and security network, and this siren/strobe module will deliver the audible and visual notifications you can depend on.
 

Features:

  • SSA will sound a loud audible alarm 110dB and flash a strobe lights when activated by an alarm or Z-wave network command
  • Intended for use inside the home with a Z-wave Home Automation & Security network as a primary and/or auxiliary alarm
  • Plug into a wall outlet or use with 9V battery only
  • Also acts as a signal repeater
  • Tamper proof feature uses 9V battery backup to sound alarm if main power is disconnected.
  •  3 Mode's Available
    • Siren ONLY
    • Strobe ONLY
    • Siren & Strobe FULL Alarm
Lense Color:
Quantity:
Add To Cart

Specifications

SSA1 (clear lense), SSA2 (red lense)

* FCC and Canada IC certified for 908.4 MHZ Z-Wave RF communications.
* Complies with European Test standard: ETSI EN 300 220 for 868.4 MHZ Z-Wave RF communications.
* Dimensions: 3.5" diameter x 1.25" (90mm diameter x 34mm)
* Power: 12V DC adaptor and option for 9V backup battery
* Frequency Range: 908.42MHz (US); 868.4MHz (EU)
* Distance Range: Max 100ft line of sight in unobstructed environment
* Product Weight: 0.5 lb
* Operating Temp: -10ºC (14F) to +70ºC (158F)
* System Requirement: Any Z-WaveTM enabled network and controller
* Install: With two screws using the included mounting plate.